TECHNICAL DATA |
Reverse side of unit
|
Network |
IEEE 802.3 - 10BaseT (*) |
Network connection |
1 x RJ45 socket (*) |
Protocols |
TCP/IP, HTTP (*) |
User name / password protection |
User-definable, up to 80 characters
- one administrator password each for master and slave
- up to 8 user profiles, each with user-definable access to each socket |
Device names |
A name can be assigned to each ePowerSwitch (master and slave). Likewise, each consumer (socket) can be given a name. These names are displayed on screen when a user logs on. |
Indication |
One LED for each circuit and for Web server readiness and network activity (*).
Four readiness indicators for the slaves (*).
One switching state LED for each socket |
Expansion |
Through serial bus with RJ11 cable (about 15 cm; supplied with product) |
Serial port |
Master: D-Sub, 9-pin
Slave: RJ-9, 4-pin |
230 V connector |
IEC 320 (inlet connector for non-heating devices) |
Mains connection |
2 sockets |
Consumer connection |
8 plugs |
Max. switching current |
2 x 10 A per device (master and slave) |
per device (master and slave) |
10 A each for the two separate circuits |
per consumer |
10 A continuous current
120 A peak current |
Fuse |
2 x 10 A, time-lag |
Controller power supply |
Redundant, through one or both connected power supplies. Automatic changeover. |
Voltage range |
200 to 250 V |
Operating temperature |
0 to 50 °C |
Humidity |
10 to 80 %, non-condensing |
Dimensions |
19" 1 height unit – 485 x 150 x 45 mm (w x d x h) |
Weight |
2.4 kg (master), 2.2 kg (slave) |
Enclosure |
Metal |
